Release Agent Spray Gun
FS-1 Release Agent Spray Gun
Special designed to handle spray able fluids of very low viscosities (Ex. Release Agents or oils) in finest droplets with reduced overspray. Fine coordination of prevision made nozzle, needle and air cap produce an atomizing result which particularly when applying release agents gives an extreme smooth layer on molds. This very handy gun is popular in the field of thermoplastic industries and the foundry industries. Featuring handy short gun body and the duo-feed hose for fluid as well as atomizing air through the grip to allow comfortable handling. Double material tube can transport liquid material and atomizing air at the same time, eliminating mold collision damage and improving work efficiency.
(mm) | 0.2/0.3/0.5/0.8/1.0/1.2/1.5 |
Flat Spray Air Cap | 450 /600 Standard / 900 |
Round Spray Air Cap | 150 ( Chuẩn ) |
Max Material Pressure | 4 bar (58 PSI) |
Max Air Pressure | 6 bar (87 PSI) |
Air Hose ( ID*OD ) | PU 4mm*6mm |
Material Hose ( ID*OD ) | PE 4mm*6mm |
Gun Body Material | Aluminum |
Nozzle & Needle | Stainless Steel |
Mass | 240k ( 0.53 Ib ) |